Saintleo PRM522 Module 4 Case Analysis Assignment 2 Latest 2019 JULY

PRM522 Best Practices Project Mgt

Module 4 Case Analysis Assignment 2

PRM 522 Case Analysis
Guidelines and Requirements

As you progress
through this course, you will encounter several companies in the textbook that
havegone through a process in which best practices have been evaluated,
developed, implemented, andmonitored. These companies have established hundreds
of individual best practices that can beobserved, duplicated, and used in other
companies. You are assigned three different companies toperform a case analysis
of those best practices.

This assignment
requires you to identify and evaluate the best practices that the three
selectedcompanies developed and implemented in the cases contained within the
textbook, and answer severalspecific questions related to the best practices of
these three companies. In addition, you are to identifythe best practices that
were used, and analyze them for their effectiveness.

The content that must
be included in each case analysis increases as you progress. “Perform
youranalysis through chapter 4, 8, and 12” means that you are to only use the
analytical tools and informationdiscussed up to that point in the textbook. As
you progress through your textbook, you will encounterseveral companies in the
textbook that have gone through a process in which best practices have
beenevaluated, developed, implemented, and monitored. Thus, each chapter illustrates
different processesand varying levels of implementation of the best practices
that these companies have established. Youare to address only the chapters that
have been covered at the specific point when you perform the caseanalysis. Many
of these individual best practices and processes can be observed, duplicated,
and usedin other companies. You are assigned three different companies to
perform a case analysis of the bestpractices that were chosen during the
development and implementation process previously discussed.

Case Analysis will be
completed on the following companies:

? Continental Computer
Corporation (Use Knowledge attained through Chapter 4).Case 1 due Sunday 11:59
PM EST/EDT of Module 2.

? Case 2: Haller Specialty Manufacturing (Use
Knowledge attained through Chapter 8). Case 2 due Sunday 11:59 PM EST/EDT of
Module 4.

? Case 3: The Space
Shuttle Challenger Disaster (Use Knowledge attained through Chapter 12)Case 3
due Sunday 11:59 PM EST/EDT of Module 6.

Your primary objective
in the case analysis assignments is to identify and evaluate the best
practicesthat the three selected companies developed and implemented in the
cases contained in thetextbook. Requirements for each case analysis include:

? Specifically address
the case questions asked in the textbook. In addition, specifically identify
thebest practices for each of these three companies up to the identified point
in the textbook.

? In addition to
answering the case questions in the textbook, you must address:

? Why or why not the
specific best practice was effective.

? Did it work?

? Why or why not?

? Identify and
document the feedback loop used to determine the success of the best practice.
Ifone was not present, create a feedback loop that would work in providing
effective and efficientfeedback.

? Discuss whether or
not each best practice would work in other departments, organizations,
orindustries. If it would work in other domains, explain how and why. If not,
explain why it wouldnot work.